Publications

Utilisez la recherche instantanée pour plus d'efficacité.


2017

Sun, Binhan et Vanderesse, Nicolas et Fazeli, Fateh et Scott, Colin et Chen, Jianqiang et Bocher, Philippe et Jahazi, Mohammad et Yue, Stephen. 2017. "Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel". Scripta Materialia. Vol. 133, p. 9-13.
Foroozmehr, Fayaz et Verreman, Yves et Chen, Jianqiang et Thibault, Denis et Bocher, Philippe. 2017. "Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels". Engineering Fracture Mechanics. Vol. 175, p. 262–278.
Jomaa, Walid et Songmene, Victor et Bocher, Philippe. 2017. " Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals". Machining Science and Technology. p. 1-27.
Meimandi, Shilan et Vanderesse, Nicolas et Thibault, Denis et Bocher, Philippe et Viens, Martin. 2017. " Macro-defects characterization in cast CA-6NM martensitic stainless steel". Materials Characterization. Vol. 124, p. 31-39.
Touazine, Heithem et Jahazi, Mohammad et Bocher, Philippe. 2017. " Accurate determination of damaged subsurface layers in machined Inconel 718". International Journal of Advanced Manufacturing Technology. Vol. 88, n° 9-12, p. 3419-3427.
Anderson, M. et Thielin, A. L. et Bridier, F. et Bocher, P. et Savoie, J.. 2017. "δ Phase precipitation in Inconel 718 and associated mechanical properties". Materials Science and Engineering A. Vol. 679, p. 48-55.
Javadi, Hamid et Jomaa, Walid et Texier, Damien et Brochu, Myriam et Bocher, Philippe. 2017. "Surface roughness effects on the fatigue behavior of as-machined inconel 718". Solid State Phenomena. Vol. 258, n° 5, p. 306-309.
McMeekin, Kevin et Sirois, Frédéric et Tousignant, Maxime et Bocher, Philippe. 2017. " Improving the accuracy of time-harmonic FE simulations in induction heating applications Towards better ferromagnetic material models". COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. Vol. 36, n° 2, p. 526-534.

2016

Chen, Jianqiang et Demers, Vincent et Cadotte, Eve-Line et Turner, Daniel et Bocher, Philippe. 2016. "Structural performance of inconel 625 superalloy brazed joints". Journal of Materials Engineering and Performance. Vol. 26, n° 2, p. 547–553.
Novelli, Marc et Fundenberger, Jean-Jacques et Bocher, Philippe et Grosdidier, Thierry. 2016. "On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature". Applied Surface Science. Vol. 389, p. 1169-1174.
Jomaa, Walid et Lévesque, Julie et Bocher, Philippe et Divialle, Arnaud et Gakwaya, Augustin. 2016. "Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis". International Journal of Advanced Manufacturing Technology. p. 1–12.
Texier, D. et Zedan, Y. et Amoros, T. et Feulvarch, E. et Stinville, J. C. et Bocher, P.. 2016. "Near-surface mechanical heterogeneities in a dissimilar aluminum alloys friction stir welded joint". Materials and Design. Vol. 108, p. 217-229.
Vanderesse, N. et Anderson, M. et Bridier, F. et Bocher, P.. 2016. "Inter- and intragranular delta phase quantitative characterization in Inconel 718 by means of image analysis". Journal of Microscopy. Vol. 261, n° 1, p. 79-87.
Jomaa, W. et Mechri, J. et Lévesque, J. et Gakwaya, A. et Songmene, V. et Bocher, P.. 2016. "Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy". XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016).
Michel, Hesser Taboada et Reda, Layla Sasaki et Santos, Georgia Effgen et Cormier, Jonathan et Dumont, Christian et Villechaise, Patrick et Bocher, Philippe et Texier, Damien et Georges, Eric et Bridier, Florent et Hamon, Florence et Devaux, Alexandre. 2016. "Mechanical properties of cast wrought hybrid disks". Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys (Seven Springs, PA, USA, Sept. 11-15, 2016). Minerals, Metals and Materials Society.. p. 539-548.
Landry Giraud, Hugo Robe, Christophe Claudin, Christophe Desrayaud, Philippe Bocher, Eric Feulvarch. 2016. "Investigation into the dissimilar friction stir welding of AA7020-T651 and AA6060-T6". Journal of Materials Processing Technology. Vol. 235, n° September 2016, p. 220–230.
Giraud, Landry et Robe, Hugo et Claudin, Christophe et Desrayaud, Christophe et Bocher, Philippe et Feulvarch, Eric. 2016. "Investigation into the dissimilar friction stir welding of AA7020-T651 and AA6060-T6". Journal of Materials Processing Technology. Vol. 235, p. 220-230.
Quevedo Gonzalez, Fernando et Vanderesse, Nicolas et Barraud, Anthony et Bocher, Philippe et Nuño, Natalia. 2016. "Prediction and measurement of apparent elastic moduli in porous additive manufactured materials for new generation of hip implants". Affiche présentée lors de la conférence : 10th World Biomaterials Congress (Montreal, QC, Canada, May 17-22, 2016)..
Comot, Pierre et Bocher, Philippe et Belanger, Pierre. 2016. "Ultrasonic guided wave inspection of Inconel 625 brazed lap joints". Proc. SPIE 9804, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016, 980408 (April 8, 2016).
Pourian, Meysam H. et Bridier, Florent et Pilvin, Philippe et Bocher, Philippe. 2016. "Prediction of crack initiation sites in alpha Ti-alloys microstructures under dwell-fatigue using Cellular Automaton simulation method". International Journal of Fatigue. Vol. 85, p. 85-97.
Savaria, Vincent et Bridier, Florent et Bocher, Philippe. 2016. "Predicting the effects of material properties gradient and residual stresses on the bending fatigue strength of induction hardened aeronautical gears". International Journal of Fatigue. Vol. 85, p. 70-84.
Walid Jomaa, Victor Songmene, Philippe Bocher. 2016. "An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations". Journal of Materials Engineering and Performance. Vol. 25, n° 3, p. 1010–1027.
Jomaa, Walid et Songmene, Victor et Bocher, Philippe. 2016. "An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations". Journal of Materials Engineering and Performance. Vol. 25, n° 3, p. 1010-1027.
Vanderesse, N. et Ky, I. et Quevedo Gonzalez, F. et Nuño, N. et Bocher, P.. 2016. "Image analysis characterization of periodic porous materials produced by additive manufacturing". Materials & Design. Vol. 92, p. 767-778.
Mohsen Mokhtabad Amrei, Hossein Monajati, Denis Thibault, Yves Verreman, Philippe Bocher. 2016. "Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld". Metallography, Microstructure, and Analysis. Vol. 5, n° 1, p. 50–61.
Anderson, M. et Bridier, F. et Gholipour, J. et Jahazi, M. et Wanjara, P. et Bocher, P. et Savoie, J.. 2016. "Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process". Journal of Materials Engineering and Performance. Vol. 25, n° 4, p. 1526-1538.
Aghasibeig, Maniya et Monajatizadeh, Hossein et Bocher, Philippe et Dolatabadi, Ali et Wuthrich, Rolf et Moreau, Christian. 2016. "Cold spray as a novel method for development of nickel electrode coatings for hydrogen production". International Journal of Hydrogen Energy. Vol. 41, n° 1, p. 227-238.
Amrei, Mohsen Mokhtabad et Monajati, Hossein et Thibault, Denis et Verreman, Yves et Germain, Lionel et Bocher, Philippe. 2016. "Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal". Materials Characterization. Vol. 111, p. 128-136.
Elhadi, A. et Bouchoucha, A. et Jomaa, W. et Zedan, Y. et Schmitt, T. et Bocher, P.. 2016. "Study of surface wear and damage induced by dry sliding of tempered AISI 4140 steel against hardened AISI 1055 steel". Tribology in Industry. Vol. 38, n° 4, p. 475-485.

2015

J.C. Stinville, M.P. Echlin, D. Texier, F. Bridier, P. Bocher, T.M. Pollock. 2015. "Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation". Exp. Mech..
H Robe, Y Zedan, J Chen, E Feulvarch, P Bocher. 2015. "Microstructural and mechanical characterization of a dissimilar friction stir welded butt joint made of AA2024-T3 and AA2198-T3". Materials Characterization.
J.C. Stinville, N. Vanderesse, F. Bridier, P. Bocher, T.M. Pollock. 2015. "High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy". Acta Materialia. Vol. 98, p. 29-42.
Stinville, J. C. et Echlin, M. P. et Texier, D. et Bridier, F. et Bocher, P. et Pollock, T. M.. 2015. "Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation". Experimental Mechanics. Vol. 56, n° 2, p. 197-216.
W. Jomaa, V. Songmene & P. Bocher. 2015. "An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel". Materials and Manufacturing Processes.
Lotfi Toubal, Philippe Bocher, André Moreau. 2015. "Bimodal dwell-fatigue Weibull distribution of forged titanium IMI 834". International Journal of Damage Mechanics . Vol. 24, n° 5, p. 629-645.
Jomaa, W. et Songmene, V. et Bocher, P.. 2015. "An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel". Materials and Manufacturing Processes. Vol. 31, n° 7, p. 838-844.
Paquin, M, Thibault, D , Bocher, P, Lévesque, J.-B, Verreman, Y, Shinozaki, K. 2015. "Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds". Welding in the World. Vol. 59, n° 4, p. 521-532.
Matteo Strano, Alessandro Marra, Valerio Mussi, Massimo Goletti and Philippe Bocher . 2015. "Endurance of Damping Properties of Foam Filled Tubes". Materials.
Kevin McMeekin, Maxime Tousignant, Philippe Bocher, Frédéric Sirois. 2015. "Exact Power-Equivalent Complex Permeability Model for Nonlinear and Hysteretic Materials". CompuMag Montréal, Canada.
Mokhtabad Amrei, M , Verreman, Y, Bridier, F, Thibault, D, Bocher, P. 2015. "Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints". Metallography, Microstructure, and Analysis. Vol. 4, n° 3, p. 207-218.
Savaria, V.a, Monajati, H., Bridier, F., Bocher, P.. 2015. "Measurement and correction of residual stress gradients in aeronautical gears after various induction surface hardening treatments". Journal of Materials Processing Technology. Vol. 220, p. 113-123.
Hamid Pourian, M., Pilvin, P., Bridier, F., Bocher, P. . 2015. "Modeling the elastoplastic behaviors of alpha Ti-alloys microstructure using Cellular Automaton and finite element methods". Computational Materials Science. Vol. 99, p. 33-42.
Kamkar, N. , Bridier, F., Jedrzejowski, P., Bocher, P.. 2015. "Water droplet impact erosion damage initiation in forged Ti-6Al-4V". Wear. Vol. 322-323, p. 192-202.
Stinville, J.C. , Bridier, F., Ponsen, D., Wanjara, P., Bocher, P.. 2015. "High and low cycle fatigue behavior of linear friction welded Ti-6Al-4V". International Journal of Fatigue. Vol. 70, p. 278-288.

2014

Hoseini, M. , Bocher, P., Shahryari, A., Azari, F., Szpunar, J.A., Vali, H.. 2014. "On the importance of crystallographic texture in the biocompatibility of titanium based substrate". Journal of Biomedical Materials Research - Part A. Vol. 102, p. 3631-3638.
Philippe Bocher, Nelly Kamkar, Florent Bridier and Pawel Jedrzejowski . 2014. "Crack nucleation at incubation and early stages of water droplet erosion in Ti-6Al-4V".
Pourian, M.H., Pilvin, P., Bridier, F., Bocher, P.. 2014. "Heterogeneous elastic behavior of HCP titanium polycrystalline aggregates simulated by cellular automaton and finite element". Computational Materials Science. Vol. 92, p. 468-475.
Toubal, Lotfi; Bocher, Philippe; Moreau, André. 2014. "Bimodal dwell-fatigue Weibull distribution of forged titanium IMI 834". International Journal of Damage Mechanics.
Godin, Stéphane. 2014. "Effet d'un enrichissement en nickel sur la stabilité mécanique de l'austénite de réversion lorsque soumise à de la fatigue oligocyclique". Mémoire de maîtrise, École de technologie supérieure.
Walid Jomaa, Victor Songmene, Philippe Bocher. 2014. "Predictive analytical modeling for high speed machining of ductile and hard materials".
Jean-Charles Stinville, Bridier Florent, Damien Ponsen, Mahfoud Maliki, Priti Wanjara, Philippe Bocher. 2014. "Microstrutural characterisation and Fatigue properties of linear friction welded Ti-6Al-4V alloy".
Jose Ruiz-Vargas, Nathalie Siredey-Schwaller, Pierre Noyrez, Sandrine Mathieu, Philippe Bocher, Nathalie GEY. 2014. "Potential and Limitations of Microanalysis SEM Techniques to Characterize Borides in Brazed Nibased Superalloys". Materials Characterization. n° 94C, p. pp. 46-57.
Vincent Savaria, Hossein Monajati, Florent Bridier, Philippe Bocher . 2014. "Measurement and correction of residual stress gradients in aeronautical gears after various induction surface hardening treatments".
Ebrahimi, G.R., Momeni, A., Jahazi, M., Bocher, P.. 2014. "Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels". Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Vol. 45, n° 4, p. 2219-2231.
Nelly Kamkar and Florent Bridier and Philippe Bocher and P. Jedrzejowski. 2014. "Water droplet impact erosion damage initiation in Forged Ti-6Al-4V".
Walid Jomaa and Monzer Daoud and Victor Songmene and Philippe Bocher and Jean-François Châtelain. 2014. "Identification and Validation of the Marusich Constitutive Law Using Finite Element modeling of machining". Proceedings of the International Mechanical Engineering Congress & Exposition.
M. Paquin and M. Brochu and P. Bocher and K. Shinozaki and K. Katoi and M. Yamamoto. 2014. "Adaptation de l'essai trans-Varestraint pour quantifier la sensibilité à la fissuration à chaud de tôles minces soudées avec métal d'apport". ISQ.
José Ruiz. 2014. "Pas encore sur le site de l'ÉTS, donc pas de titre, abstract, lien....". Thèse de doctorat, École de technologie supérieure.
Martin Gagnon. 2014. "Pas encore sur le site de l'ÉTS, donc pas de titre, abstract, lien....". Thèse de doctorat, École de technologie supérieure.
Lapalme M. and Hoseini M. and Bocher P. and Colle A. and Lévesque M.. 2014. "Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys". Experimental Mechanics. p. DOI 10.1007/s11340-013-9844-0.
Vincent Savaria. 2014. "Contraintes résiduelles et leurs impacts sur l'amorçage de fissures en fatigue de flexion dans des engrenages aéronautiques durcis superficiellement par induction". Thèse de doctorat, École de technologie supérieure.
Meysam Hamid Pourian. 2014. "Modélisation du comportement micromécanique des alliages de titane en dwell-fatigue par la méthode des automates cellulaires". Thèse de doctorat, École de technologie supérieure.
A. Momeni and G. R. Ebrahimi and M. Jahazi and P. Bocher. 2014. "Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size". Journal of Alloys and Compounds. Vol. 587, p. 199--210.
Vincent Savaria and Florent Bridier and Philippe Bocher. 2014. "Measuring in-depth residual stress gradients: The challenge of induction hardened parts". International Conference on Residual Stresses 9 (ICRS 9) n° 768-769, p. 158--165. Zurich-Durnten, Switzerland.
Florent Bridier, Jean-Charles Stinville, Nicolas Vanderesse, Patrick Villechaise, Philippe Bocher. 2014. "Microscopic strain and crystal rotation measurement within metallurgical grains". Materials Structure and Micromechanics of Fracture VII n° 592-593, p. 493-496. (July 1-3, 2013). Brno, Czech Republic.
Jomaa, W., Songmene, V., Bocher, P.. 2014. "Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651". Materials. Vol. 7, n° 3, p. 1603-1624.

2013

Martin Gagnon and Antoine Tahan and Philippe Bocher and Denis Thibault. 2013. "On the Fatigue Reliability of Hydroelectric Francis Runners ". Procedia Engineering. Vol. 66, p. 565-574.
Martin Gagnon and Antoine Tahan and Philippe Bocher and Denis Thibault. 2013. "A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner". International Journal of Fatigue. Vol. 47, p. 300-307.
Maldar, A.R., Ebrahimi, G.R., Haghshenas, M., Jahazi, M., Bocher, P.. 2013. "Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps". Journal of Materials Engineering and Performance. Vol. 22, n° 11, p. 3306-3314.
Majid Hoseini and Philippe Bocher and Arash Shahryari and Fereshteh Azari and Jerzy Szpunar and Hojatollah Vali. 2013. "On the importance of crystallographic texture in the biocompatibility of titanium based substrate". Journal of Biomedical Materials Research: Part A 2013 DOI: 10.1002/jbm.a.35028.
Mamiandrianina Andriamisandratra. 2013. "Analyse numérique de la microplasticité aux joints de grains dans les polycristaux métalliques CFC". Mémoire de maîtrise, École de technologie supérieure.
J. Yi and M. Gharghouri and P. Bocher and M. Medraj. 2013. "Distortion and residual stress measurements of induction hardened AISI 4340 discs". Materials Chemistry and Physics. Vol. 142, n° 1, p. 248--258.
D. Shahriari and A. Zolfaghari and M. Jahazi and P. Bocher. 2013. "Development of an expert system to characterize weld defects identified by ultrasonic testing". American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP n° 5 : High-Pressure Technology, . (July 14-18, 2013). Paris, France.
J. Ruiz-Vargas and N. Siredey-Schwaller and P. Bocher and A. Hazotte. 2013. "First melting stages during isothermal brazing, of Ni/BNi-2 couples". Journal of Materials Processing Technology. Vol. 213, n° 12, p. 2074--2080.
Mathieu Paquin and Denis Thibault and Philippe Bocher and Yves Verreman. 2013. "Study on cold cracking test methods for low carbon soft-martensitic stainless steel flux cored arc welding". Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 Vol. 1, p. 733--744. (Oct. 27-31, 2013). Montreal, QC, Canada.
Rabih Kassab and Henri Champliaud and Philippe Bocher and Jacques Lanteigne and Van Ngan Le. 2013. "Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment". Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 Vol. 2, p. 774--783. (Oct. 27-31, 2013). Montreal, QC, Canada.
Benjamin Larregain and Nicolas Vanderesse and Florent Bridier and Philippe Bocher and Patrick Arkinson. 2013. "Method for accurate surface temperature measurements during fast induction heating". Journal of Materials Engineering and Performance. Vol. 22, n° 7, p. 1907--1913.
A. Moreau and L. Toubal and P. Bocher and M. Humbert and E. Uta and N. Gey. 2013. "Evaluation of macrozone dimensions by ultrasound and EBSD techniques". Materials Characterization. Vol. 75, p. 115--128.
A. Gariepy and F. Bridier and M. Hoseini and P. Bocher and C. Perron and M. Levesque. 2013. "Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351". Surface and Coatings Technology. Vol. 219, p. 15--30.
A. Gariepy and S. Larose and C. Perron and P. Bocher and M. Levesque. 2013. "On the effect of the orientation of sheet rolling direction in shot peen forming". Journal of Materials Processing Technology. Vol. 213, n° 6, p. 926--938.
A. Gariepy and S. Larose and C. Perron and P. Bocher and M. Levesque. 2013. "On the effect of the peening trajectory in shot peen forming". Finite Elements in Analysis and Design. Vol. 74, p. 111.
Walid Jomaa and Victor Songmene and Philippe Bocher. 2013. "On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel". Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 Vol. 1, p. 94--103. (Oct. 27-31, 2013). Montreal, QC, Canada.
N. Kamkar and F. Bridier and P. Bocher and P. Jedrzejowski. 2013. "Water droplet erosion mechanisms in rolled Ti-6Al-4V". Wear. Vol. 301, n° 1-2, p. 442--448.
Melissa Anderson and Javad Gholipour and Florent Bridier and Philippe Bocher and Mohammad Jahazi and Jean Savoie and Priti Wanjara. 2013. "Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications". Transactions of the Canadian Society for Mechanical Engineering. Vol. 37, n° 1, p. 39--52.
Amir Ansaripour and Hossein Monajatizadeh and Philippe Bocher and Davoud Asefi. 2013. "Evaluation of recovery and recrystallization in cold rolled low carbon steel by magnetic hysteresis loop measurements". Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 Vol. 1, p. 225--233. (Oct. 27-31, 2013). Montreal, QC, Canada.
Noureddine Barka and Abderrazak El Ouafi and Philippe Bocher and Jean Brousseau. 2013. "Effects of material properties fornon-equilibrium conditions in induction heating process". Environmental and Materials Engineering n° 664, p. 496--503. (Dec. 9-10, 2012). Seoul, Korea.
Noureddine Barka and Abderrazak El Ouafi and Philippe Bocher and Jean Brousseau. 2013. "Explorative study and prediction of overtemperingregion of disc heated by induction process using 2D axisymmetric model and experimental tests". Materials and Manufacturing Research n° 658, p. 259--265. (Dec. 19-20, 2012). Hong Kong, China.
Noureddine Barka and Abdel Jelil Khelalfa and Abderrazak El Ouafi and Philippe Bocher and Jean Brousseau. 2013. "Effect of skin depth on hardness profile of gear heated by induction using 2D model". Environmental and Materials Engineering n° 664, p. 884--890. (Dec. 9-10, 2012). Seoul, Korea.
N. Boutana and P. Bocher and M. Jahazi. 2013. "Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata". International Journal of Fatigue. Vol. 51, p. 49--56.
Ruiz-Vargas, J., Siredey-Schwaller, N., Gey, N., Bocher, P., Hazotte, A.. 2013. "Microstructure development during isothermal brazing of Ni/BNi-2 couples". Journal of Materials Processing Technology. Vol. 213, n° 1, p. 20-29.

2012

Johan Pascal. 2012. "Mesure et prédiction des distorsions des engrenages traités par induction". Mémoire de maîtrise, École de technologie supérieure.
Pourian M. H. and Bridier F. and Bocher P.. 2012. "Modeling the Micromechanical Behavior in Titanium Alloys under Dwell-Fatigue Loading Using Cellular Automaton Method". poster at the ICFDSM IX conference 16-21 September in Hyannis - Cape Code, USA.
Noureddine Barka and Ahmed Chebak and Abderrazakel Ouafi and Philippe Bocher and Jean Brousseau. 2012. "Sensitivity study of temperature profile of 4340 spur gear heated by induction process using 3D model". Mechanical and Aerospace Engineering n° 232, p. 736--741. (July 7-8, 2012). Paris, France.
Noureddine Barka and Abderrazak El Ouafi and Ahmed Chebak and Philippe Bocher and Jean Brousseau. 2012. "Study of induction heating process applied to internal gear using 3D model". Mechanical and Aerospace Engineering n° 232, p. 730--735. (July 7-8, 2012). Paris, France.
M. Gagnon and A. Tahan and P. Bocher and D. Thibault. 2012. "The role of high cycle fatigue (HCF) onset in Francis runner reliability". 26th IAHR Symposium on Hydraulic Machinery and Systems n° 15, . (Aug. 19-23, 2012). Beijing, China.
Martin Gagnon and Antoine Tahan and Philippe Bocher and Denis Thibault. 2012. "On the stochastic simulation of hydroelectric turbine blades transient response". Mechanical Systems and Signal Processing. Vol. 32, p. 178--187.
A. Gariepy and J. Cyr and A. Levers and C. Perron and P. Bocher and M. L\'evesque. 2012. "Potential applications of peen forming finite element modelling". Advances in Engineering Software. Vol. 52, p. 60--71.
N. Gey and P. Bocher and E. Uta and M. Humbert and J. Gilgert. 2012. "How texture and microtexture influence dwell fatigue lifetime in forged IMI834 titanium alloys". Ti 2011 - Proceedings of the 12th World Conference on Titanium Vol. 2, p. 879--882. (June 19-24, 2011). Beijing, China.
Majid Hoseini and Philippe Bocher and Fereshteh Azari and Hojatollah Vali and Jerzy A. Szpunar. 2012. "Effects of grain size and texture on the biocompatibility of commercially pure titanium". 16th International Conference on Textures of Materials n° 702-703, p. 822--825. (Dec. 12-17, 2011). Mumbai, India.
Majid Hoseini and Florent Bridier and Philippe Bocher and Hojatollah Vali and Jerzy A. Szpunar. 2012. "Thermal stability and grain growth behavior of ultrafine grained commercially pure titanium fabricated by equal channel angular pressing". Ti 2011 - Proceedings of the 12th World Conference on Titanium Vol. 1, p. 666--670. (June 19-24, 2011). Beijing, China.
Majid Hoseini and Meysam Hamid Pourian and Florent Bridier and Hojatollah Vali and Jerzy A. Szpunar and Philippe Bocher. 2012. "Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium". Materials Science and Engineering A. Vol. 532, p. 58--63.
J. Ruiz-Vargas and N. Siredey-Schwaller and N. Gey and P. Bocher and A. Hazotte. 2012. "Microstructure development during isothermal brazing of Ni/BNi-2 couples". Journal of Materials Processing Technology. Vol. 213, n° 1, p. 20--29.
Vincent Savaria and Florent Bridier and Philippe Bocher. 2012. "Computational quantification and correction of the errors induced by layer removal for subsurface residual stress measurements". International Journal of Mechanical Sciences. Vol. 64, n° 1, p. 184--195.

2011

Larregain B. and Vanderesse N. and Bridier F. and Bocher P. and Arkinson P.. 2011. "Method for accurate surface temperature measurements during fast induction heating". 26th Heat Treating Society Conference (October 31 - November 2 2011). Cincinnati, OH, USA.
Margaux Rockvam. 2011. "Caractérisation de microstructures de joints brasés avec les alliages BCu-1, BAg-13a, BAu-4, BAu-6, BNi-1a, BNi-2, BNi-3 et Palnicro 36M ayant pour métal de base un superalliage base nickel". Mémoire de maîtrise, École de technologie supérieure.
Noureddine Barka. 2011. "Étude de sensibilité du profil de dureté des engrenages traités thermiquement par induction en fonction des paramêtres machine". Thèse de doctorat, École de technologie supérieure.
Alessandro Candeo and Christophe Ducassy and Philippe Bocher and Fabrizio Dughiero. 2011. "Multiphysics modeling of induction hardening of ring gears for the aerospace industry". IEEE Transactions on Magnetics. Vol. 47, n° 5, p. 918-921. 14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2010) (May 9-12 2010). Chicago, IL, USA.
Samuel Austin. 2011. "Étude expérimentale de la résistance à la flexion en pied de dent d'engrenages cylindriques à denture droite traités thermiquement par induction". Mémoire de maîtrise, Universit du Qubec Rimouski.
Denis Thibault and Philippe Bocher and Marc Thomas and Jacques Lanteigne and Pierre Hovington and Patrice Robichaud. 2011. "Reformed austenite transformation during fatigue crack propagation of 13%Cr-4%Ni stainless steel". Materials Science and Engineering : A. Vol. 528, n° 21, p. 6519--6526.
N. Barka and P. Bocher and J. Brousseau and P. Arkinson. 2011. "Effect of dimensional variation on induction process parameters using 2D simulation". THERMEC 2011 Supplement n° 409, p. 395--400. (Aug. 1-5, 2011). Quebec City, QC, Canada.

2010

Denis Thibault. 2010. "Contribution à l'étude du comportement en fatigue des aciers inoxydables 13%CR-4%NI : contraintes résiduelles de soudage et transformation sous contrainte de l'austénite de réversion". Mémoire de maîtrise, École de technologie supérieure.
Denis Thibault. 2010. "Contribution de l'étude du comportement en fatigue des aciers inoxydables 13%CR-4%NI : contraintes résiduelles de soudage et transformation sous contrainte de l'austénite de réversion". Thèse de doctorat, École de technologie supérieure.
Grégory Blut. 2010. "Effet de la géométrie sur les paramêtres du générateur et le profil de dureté lors d'une chauffe par induction : expérience et simulation". Mémoire de maîtrise, École de technologie supérieure.
Martin Gagnon and Antoine Tahan and Philippe Bocher and Denis Thibault. 2010. "Impact of startup scheme on Francis runner life expectancy". 25th IAHR Symposium on Hydraulic Machinery and Systems p. 012107. 28th CMVA seminar (27-29 of October 2010). Qubec, Canada.
Christophe Ducassy. 2010. "Prédiction de la dureté et de la profondeur de la zone de sur-revenu lors d'une chauffe rapide par induction d'un acier 4340 trempé revenu". Mémoire de maîtrise, École de technologie supérieure.
Mélissa Anderson. 2010. "Tube hydroforming of aerospace alloys: material characterization methods". Mémoire de maîtrise, École de technologie supérieure.
Vincent Savaria and Majid Hoseini and Florent Bridier and Philippe Bocher and Patrick Arkinson. 2010. "On the measurement of residual stress gradients in induction hardened parts". Residual Stresses VIII n° 681, p. 431--436. (June 26-28 2010). Riva del Garda, Italy.
Candeo A. and Bocher P. and Dughiero F.. 2010. "Multiphysics modeling of induction hardening of ring gears". International Symposium on Heating by Electromagnetic Sources Induction, Conduction, Dielectric and Microwaves & Electromagnetic Processing (May 19-21 2010). Padua, Italy.
Félix Tsoungui. 2010. "Caractérisation mécanique et microstructurale des joints brasés d'alliages aéronautiques avec du BNI-2 comme métal d'apport". Mémoire de maîtrise, École de technologie supérieure.
Bastajib R. and Boutana N. and Bocher P. and Jahazi M.. 2010. "Application of Cellular Automata Method to Simulate the Hot Deformation Behavior of a Dual phase Titanium Alloy". Technische Mechanik. Vol. 30, n° 1-3, p. 1-14.
Lotfi Toubal, Philippe Bocher, André Moreau, Daniel Levesque. 2010. "Macroregion Size Measurements in Bimodal Titanium Forgings Using Two-Dimensional Autocorrelation Method". Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. Vol. 41A, n° 3, p. 744--750.
M. Anderson and J. Gholipour and P. Bocher and F. Bridier and J. Savoie and P. Wanjara. 2010. "Formability extension of aerospace alloys for tube hydroforming applications". International Journal of Material Forming. Vol. 3, n° Suppl. 1, p. 303--306.
Denis Thibault, Philippe Bocher, Marc Thomas, Michael Gharghouri, Marjolaine Coté. 2010. "Residual stress characterization in low transformation temperature 13%Cr-4%Ni stainless steel weld by neutron diffraction and the contour method". Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. Vol. 527, n° 23, p. 6205-6210.
Gagnon M. and Tahan S. A. and Bocher P. and Thibault D.. 2010. "Impact of startup scheme on francis runner life expectancy". 25th IAHR Symposium on Hydraulic Machinery and Systems.

2009

Ducassy C. and Bridier F. and Bocher P. and Arkinson P.. 2009. "Prediction of over-tempering during rapid induction heating". 1st Mediterranean Conference on Heat Treatment and Surface Engineering (1-3 december 2009). Sharm-el-Sheick, Egypt.
Ducassy C. and Bridier F. and Bocher P. and Arkinson P.. 2009. "Semi-empirical method to predict hardness during fast induction heating of a tempered martensitic AMS6414 steel". 48th Conference of Metallurgists (23-26 August 2009). Sudbury, Ontario, Canada.
Mohammed Nabil Boutana. 2009. "Modélisation microstructurale en fatigue/fluage à froid des alliages de titane quasi alpha par le modèle des automates cellulaires". Thèse de doctorat, École de technologie supérieure.
Lyès Hacini. 2009. "Étude des effets du martelage répétitif sur les contraintes résiduelles". Thèse de doctorat, École de technologie supérieure.
Denis Thibault and Philippe Bocher and Marc Thomas. 2009. "Residual Stress and Microstructure in Welds of 13Cr-4Ni Martensitic Stainless Steel". Journal of Materials Processing Technology. Vol. 209, n° 4, p. 2195-2202.
L. Hacini and V. N. Lê and P. Bocher. 2009. "Evaluation of Residual Stresses Induced by Robotized Hammer Peening by the Contour Method". Experimental mechanics. Vol. 49, n° 6, p. 775-783.
Lotfi Toubal, Philippe Bocher, André Moreau. 2009. "Dwell-fatigue life dispersion of a near alpha titanium alloy". International Journal of Fatigue. Vol. 31, n° 3, p. 601-605.
E. Uta and N. Gey and P. Bocher and M. Humbert and J. Gilgert. 2009. "Texture Heterogeneities in Titanium Forging analyzed by EBSD - Relation to Fatigue Crack Propagation". Journal of Microscopy. Vol. 233, n° 3, p. 451--459.
M. Humbert, A. Moreau, E. Uta, N. Gey, P. Bocher, C. Bescond. 2009. "Analysis of backscattered ultrasound amplitude of Ti–5.8Al–4Sn–3.5Zr–0.7Nb–0.5Mo–0.3Si samples in terms of their microstructures and local textures". Acta Materialia. Vol. 57, n° 3, p. 708-714.
L. Toubal and P. Bocher and A. Moreau. 2009. "Dwell-fatigue life of a near-alpha titanium alloy and ultrasonic measurement correlation". 12th International Conference on Fracture 2009, ICF-12 Vol. 2, p. 1123--1128. (July 12-17, 2009). Ottawa, ON, Canada.
P. Bocher and F. Bridier and L. Toubal and N. Boutana and E. Uta and N. Gey and M. Humbert. 2009. "Dwell-fatigue in near alpha titanium alloys: a multiscale, interdisciplinary challenge". 12th International Conference on Fracture 2009, ICF-12 Vol. 2, p. 1481--1486. (July 12-17, 2009). Ottawa, ON, Canada.

2008

H. Monajati and M. Jahazi and P. Bocher and S. Yue. 2008. "Dynamic recrystallization investigation during hot deformation of Udimet 720 nickel base superalloy". 14th International Metallurgy and Materials Congress (1618 October 2008). Istanbul, Turkey.
A. Moreau, S.E. Kruger, M. Côté, P. Bocher. 2008. "In-Situ Monitoring of Microstructure during Thermomechanical Simulations using Laser-Ultrasonics". 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications (July 16-18, 2008). Montreal, QC, Canada.
E. Uta and P. Bocher and N. Gey and M. Humbert and J. Gilbert. 2008. "EBSD analyses of dwell fracture surface in titanium alloy IMI 834". JIP, Fatigue and Plasticity : from Mechanisms to Design Vol. pp. 315-322, p. 315-322. (May 20-22, 2008). Paris, France.
Hacini L. and Van Ngan L. and Bocher P.. 2008. "Experimental analysis of hammer peening effects on 304L: The effect of impact energy". Journal of Materials Processing Technology. Vol. 208, n° 1-3, p. 542-548 .
L. Hacini, V. N. Lê, P. Bocher. 2008. "Effect of impact energy on residual stresses induced by hammer peening of 304L plates". Journal of Materials Processing Technology. Vol. 208, n° 1-3, p. 542-548 .
L. Germain and N. Gey and M. Humbert and P. Vo and M. Jahazi and P. Bocher. 2008. "Texture heterogeneities induced by subtransus processing of near alpha titanium alloys". Acta Materialia. Vol. 56, n° 16, p. 4298-4308.
N. Boutana and P. Bocher and M. Jahazi and D. Piot and F. Montheillet. 2008. "The microstructural modelling of room temperature creep in titanium alloys using a cellular automata model". International Journal of Microstructure and Materials Properties. Vol. 3, n° 4/5, p. 642-653.
Thibault D. and Bocher P. and Thomas M. and Gharghouri M.A.. 2008. "Neutral diffraction measurements of residual stresses in 13%Cr-4% Ni weld". Vol. vol. 06-07, pp.58-59 , p. 58-59 . NRC Canadian Neuron Beam Center annual report 06-07 (2008).

2007

N. Boutana and P. Bocher and M. Jahazi and D. Piot and F. Montheillet. 2007. "Simulation of the mechanical behavior of heterogeneous materials using cellular automata". 1st International Conference of Sustainable Manufacturing (Oct. 18-19, 2007). Montreal, QC, Canada.
N. Barka and A. Khelalfa and P. Bocher and J. Brousseau and S. Sundararajan. 2007. "Analysis of the effect of frequency using numerical modeling of induction hardening process". 1st International Conference of Sustainable Manufacturing (Oct. 18-19, 2007). Montreal, QC, Canada.
Patrice Robichaud. 2007. "Stabilité de l'austénite résiduelle de l'acier inoxydable 415 soumis à la fatigue oligocyclique". Mémoire de maîtrise, École de technologie supérieure.
L. Hacini and L. Van Ngan and P. Bocher. 2007. "Traitement de surfaces par impacts : Evaluation des contraintes residuelles induites par martelage". 18me Congrs Franais de Mcanique (27-31 aot 2007). Grenoble, France..
K. Thibault-Liboiron, R. Alderliesten, R. Benedictus, P. Bocher. 2007. "Off-axis crack propagation and delamination growth in FML's". 6th Canadian International Conference on Composites (CANCOM) (Aug. 14-17, 2007). Winnipeg, MB, Canada.
Boutana N. and Bocher P. and Jahazi M. and Piot D. and Montheillet F.. 2007. "Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method". 11th World Conference on Titanium (June 3-7, 2007). Kyoto, Japan.
L. Germain and P. Vo and N. Gey and M. Jahazi and M. Humbert and P. Bocher. 2007. "Development of sharp local a microtextures during a/b thermo-mechanical processing of TIMETAL 834". 11th World Conference on Titanium (June 3-7, 2007). Kyoto, Japan.
E. Uta and M. Humbert and N. Gey and A. Hazotte and P. Bocher and M. Jahazi. 2007. "Description and characterization of texture heterogeneities in titanium alloy TIMETAL 834 with a bimodal microstructure". 11th World Conference on Titanium p. 259--262. (June 3-7, 2007). Kyoto, Japan.
Marjolaine Côté. 2007. "Étude des cinétiques de transformation de phase d'un acier inoxydable martensitique 13%Cr-4%Ni". Mémoire de maîtrise, École de technologie supérieure.
Arafin M. A. and Medraj M. and Turner D. P. and Bocher P.. 2007. "Mathematical modeling and experimental investigations of isothermal solidification during transient liquid phase bonding of nickel superalloys". Journal of Advanced Materials Research. Vol. 15-17, p. 882-887.
Barka N. and Bocher P. and Brousseau J. and Galopin M. and Sundararajan S.. 2007. "Modeling and Sensitivity Study of the Induction Hardening Process". Advanced Materials Research. Vol. 15-17, p. 525-530.
M. A. Arafin and M. Medraj and Daniel P. Turner and P. Bocher. 2007. "Transient Liquid Phase Bonding of Nickel Superalloys with BNi-2: Modeling and Experimental Investigations". Materials Science and Engineering : A. Vol. 447, n° 1-2, 25, p. 125-133 .
M. A. Arafin and M. Medraj and D. P. Turner and P. Bocher. 2007. "Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer". Materials Chemistry and Physics. Vol. 106, n° 1, 15, p. 109-119.
Arafin M. A. and Medraj M. and Turner D. P. and Bocher P.. 2007. "Random Walk Modeling of Isothermal Solidification during TLP Bonding of SS 410 and 321 with BNi-2". Journal of Defect and Diffusion Forum. Vol. 106, n° 1, p. 109-119 [CRIAQ + P&WC].
M. A. Arafin and M. Medraj and D. P. Turner and P. Bocher. 2007. "Optimization of process variables during TLP Bonding of nickel superalloys". Conference of Metallurgists (COM) (Toronto, ON, Canada, Aug. 25-30, 2007) p. 301--314. Montreal, Canada.
P. Vo and M. Jahazi and S. Yue and P. Bocher. 2007. "Flow stress prediction during hot working of near-Alpha titanium alloys". Materials Science and Engineering : A. Vol. 447, n° 1-2, p. 99--110.

2006

Redouane Bastajib. 2006. "Simulation de la forge d'alliage biphasé par la méthode des automates cellulaires". Mémoire de maîtrise, École de technologie supérieure.
Boutana N. and Bocher P. and Jahazi M. and Piot D. and Montheillet F.. 2006. "Utilisation des automates cellulaires pour etudier le comportement en fatigue-fluage des alliages de titane". Matriaux 2006. Dijon, France.
N. Barka and P. Bocher and M. Galopin and J. Brousseau and S. Sundararajan. 2006. "Sensitivity study of induction hardening machine parameters of SAE-4340 steel specimen". Conference of Metallurgists (COM) p. 525--530. (Oct. 1-4, 2006). Montreal, QC, Canada.
L. Dubourg and M. Jahazi and G. Dezaise and P. Bocher. 2006. "Microstructure and mechanical characterisation of FSW 7075-T6 lap joints". Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques p. 107--120. (Oct.1-4, 2006). Montreal, Canada.
L. Hacini, V. N. Lê, P. Bocher, D. Thibault. 2006. "Effect of energy level on stresses induced by robotized hammer peening". Conference of Metallurgists (COM) (Montreal, QC, Canada, Oct.1-4, 2006) p. 781-790. Montreal, Canada.
Muhammad A. Arafin and Mamoun Medraj and Daniel P. Turner and Philippe Bocher. 2006. "Mathematical Modeling and Experimental Investigations of Isothermal Solidification during Transient Liquid Phase Bonding of Nickel Superalloys". THERMEC 2006 Supplement (Vancouver, Canada, Jul. 4 - 8 , 2006) n° 15-17, p. 882--887. Clausthal-Zellerfeld, Germany.
N. Barka and P. Bocher and J. Brousseau and M. Galopin and S. Sundararajan. 2006. "Modeling and sensitivity study of the induction hardening process". THERMEC 2006 Supplement n° 15-17, p. 525--530. (Jul. 4 - 8, 2006). Vancouver, Canada.
Boutana N. and Bocher P. and Jahazi M. and Savoie J. and Piot D. and Montheillet F.. 2006. "Microstructural modeling of room temperature creep in forged titanium alloys using cellular automata model". Thermec 2006 (June 2006). Vancouver, Canada.
M. A. Arafin and M. Medraj and D. P. Turner and P. Bocher. 2006. "Thermodynamic modeling and experimental investigation of brazed joints used in aerospace industry". 3rd International Brazing and Soldering Conference (San Antonio, TX, USA, April 24-26, 2006) p. 189--196. Materials Park, OH, USA.
Vo P. and Jahazi M. and Yue S. and Bocher P.. 2006. "Flow stress prediction during hot working of near-alpha titanium alloys". Materials Science and Engineering: A. Vol. 447, n° 1-2, p. 99-110.
M. Humbert and L. Germain and N. Gey and P. Bocher and M. Jahazi. 2006. "Study of the variant selection in sharp textured regions of bimodal IMI 834 billet". Materials Science and Engineering : A. Vol. 430, n° 1-2, p. 157--164.

2005

Daniel Turner. 2005. "Évolution microstructurale des joints brasés sur l'inconel 718 avec les alliages BNi-2 et PALNICRO 36M". Mémoire de maîtrise, École de technologie supérieure.
Boutana N and Bocher P. and Jahazi M. and Savoie J. and Piot D. and Montheillet F.. 2005. "Modelling mechanical behaviour of heterogeneous materials using cellular automata: Application to some forged titanium alloys". Mesomechanic7. Montreal, Canada.
Bocher P. and Jahazi M. and Germain L. and Gey N. and Humbert M.. 2005. "Variant selection in Forged titanium alloys: effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations". Mesomechanic7. Montreal, Canada.
Wanjara P. and Monajati H. and Jahazi M. and Germain L. and Bocher P.. 2005. "Deformation Processing and Microstructural Evolution in a Near-Alpha Titanium Alloy". Materials Science & Technology.
Germain L. and Gey N. and Humbert M. and Bocher P. and Jahazi M.. 2005. "Beta to alpha variant selection in sharp hcp textured regions of a bimodal IMI 834 billet". ICOTOM 14-Edit..
Philippe Bocher and Mohammad Jahazi and Lionel Germain and Priti Wanjara and Nathalie Gey and Michel Humbert. 2005. "Beta Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy". Solid State Phenomena. Vol. 105, p. 127--132.
Lionel Germain and Nathalie Gey and Ludovic Humbert and Philippe Bocher and Mohammad Jahazi. 2005. "Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet". Acta Materialia. Vol. 53, n° 13, p. 3535--3543.
Ali Reza Khodabandeh and Mohammad Jahazi and Steve Yue and Philippe Bocher. 2005. "Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel". ISIJ International. Vol. 45, n° 2, p. 272--280.

2004

P. Bocher and M. Jahazi and P. Wanjara and L. Germain and N. Gey and M. Humbert. 2004. "Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy". 2nd International Conference on Texture and Anisotropy of Polycrystals (ITAP-2) (July 7-9, 2004). Metz, France.
Mohammad Jahazi and Lionel Germain and Nathalie Gey and Michel Humbert and Philippe Bocher. 2004. "Specific EBSD data processing to analyse separately the ap/as microtexture of bimodal Titanium alloys". Materials Characterization. Vol. 54, p. 216--222.

2003

Germain L. and Gey N. and Humbert M. and Bocher P. and Jahazi M.. 2003. "Texture and Microtexture Analysis of an IMI 834 alloy after Thermo Mechanical Processing". Vol. Vol. II, p. 1291, p. 1291. Ti-2003 Science and technology. Hamburg.

2001

Girault E. and Godet S. and Jacques P. and Bocher P. and Verlinden B. and Van Humbeeck J.. 2001. "Effect of hot-rolling in the austenitic region on the formation of isothermal bainite in a 0.4C-1.5Si-1.4Mn steel". J. Phys. IV. Vol. 11, n° PR8, p. 217-222.
Verlinden B. and Bocher P. and Girault E. and Aernoudt R.. 2001. "Austenite texture and bainite/austenite orientation relationships in TRIP steel". Scripta Mat.. Vol. 45, n° 9, p. 909-616.
Le Gall R. and Philippe Bocher and Verlinden B. and Jonas J.J.. 2001. "Effect of solutes in the grain boundary character distribution after dynamic recrystallization". J. Phys. Vol. 11, p. 77. MECAMET IV. France.

1999

B. Bayle and P. Bocher and J. J. Jonas and F. Montheillet. 1999. "Flow stress and recrystallization during hot deformation of Cu-9%Sn alloys". Mater Sci. Tech.. Vol. 15, p. 803.
P. Bocher and J. J. Jonas . 1999. "Characteristics of nucleation ad growth during the dynamic recrystallization of a 304 stainless steel". p. 25. Fourth International Conference on Recrystallization and Related Topics in REX\'99. Japan.

1998

P. Bocher and J. Azar and J.J. Jonas . 1998. "Using orientation imaging microscopy to interpret the dynamically recrystallized texture of low stacking fault energy FCC material". Mat. Sci. Forum Vol. 273-275, p. 249.
Bocher, Ph., Azar, J., Adams, B.L., Jonas, J.J.. 1998. "Using OIM to interpret the dynamically recrystallized texture of a low stacking fault energy FCC material". Materials Science Forum. Vol. 273-275, p. 249-254.

1969

Walid Jomaa, Victor Songmene, Philippe Bocher. 1969. "An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations". Journal of Materials Engineering and Performance.